MINI 5
p. 1
MARCH 2011
INSTRUCTIONS AND MAINTENANCE
MINI 5 MODEL
Read the directions carefully before operating.
Don’t use the machine differently from following description.
1.
SPECIFICATIONS
MODEL:
MINI 5
POWER SUPPLY:
230 V / 50Hz
TOTAL INSTALLED POWER:
W 2800
IRON POWER:
W 800
BOILER POWER:
W 1000 + W 1000
BOILER CAPACITY:
3,8 l.
IRONING ENDURANCE:
about 4 hours
OPERATING STEAM PRESSURE:
2,8 BAR
MAXIMUM PRESSURE:
5 BAR
WEIGHT:
KG. 13,5
OVERALL DIMENSIONS:
cm 25x29x37 h.
MADE IN ITALY
2.
IMPORTANT
Before installing MINI 5 it is necessary to set up
the following facilities:
1.
a grounded socket suitable to MINI 5 power;
2.
a steady and plane surface where to put the
machine.
For the transport and the displacement, seize the
generator only by the handle, never pull its electric
cables (fig. 1).
3.
OPENING OF PACKAGE
1.
Open the box containing MINI 5, take out the
instructions handbook and read it carefully.
2.
Remove MINI 5 from the box, mount the two
pieces of the cable support and insert it deep
into the special support holder (fig. 1) placed on the back side of the generator.
3.
Fix the iron cable to the support hook (avoid twining).
4.
Place the iron rest on the ironing table and put the iron on its rubber iron rest (fig. 1).
5.
Check that the iron plug is connected to the socket (fig. 2 G)
4.
CONNECTION AND STARTING
With MINI 5 switched off and disconnected plug:
1.
Unscrew the security valve plug (fig. 4), fill the boiler with water till overflow or at pleasure.
2.
Take the plug by the plastic part and screw it again: do not tighten too much or its gasket
might get spoilt.
3.
Insert the plug into a 230 V 16 A socket.
IRON
STEAM
TUBE
CABLE
SUPPORT
SPRING
IRON REST
ELECTRIC WIRE
STEAM
TUBE
Fig. 1
