Roto ZEL STG HS 1 II, Руководство пользователя

Страница: 18 / 44

▻
M3 for programming the exterior accessories ( red )
► The receiver is now in Programming mode for three minutes.
b. Programming the master transmitter
Press the programming button on the master transmitter whilst in Program-
ming mode until the receiver confirms that programming was successful (sig-
nal tone, jerk, LED, etc.).
Deleting the receiver's programming
Press and hold down the M1 and M3 buttons on the control unit until the LED
lights up continuously. This will clear all the programmed transmitters.
► The receiver can now be reprogrammed.
Programming more transmitters
1. Press the programming button of the master transmitter until the re-
ceiver confirms.
2. Then press the programming button of the new transmitter until the re-
ceiver confirms.
3. Now press the programming button of the new transmitter again.
4. The receiver confirms successful programming.
Installing the wall bracket
Unlocking mechanism
Wall bracket
mounting
plate
Wall bracket
26
• Before installation in the de-
sired installation position,
check that the transmitter and
receiver are functioning prop-
erly.
•
Fix the bracket to the wall with
the two screws enclosed.
18 - en