Rothenberger 1000003178, Инструкция по эксплуатации

Страница: 22 / 132

16 ENGLISH
4x 5x red
Automatic switch-off (non-use / continuous operation)
6x red
Pressure sensor fault (contact specialist dealer)
7x red
Overcurrent / Short circuit
3x yellow
Set pressure not achieved
5.4 Commissioning (B)

Screw hose onto air chamber.

Screw hose onto trigger valve.

Screw spray tube onto trigger valve.

Push in battery.
5.5 Fill tank (C)
Check charge status on the battery!

Always use tank strainer fill in 2/3 of the amount of water.

Add liquid concentrate.
Powder must have dissolved completely!

Fill up with water.

Check gasket ring. Close tank.
Only use the amount of substance required.
Observe manufacturers mixing instructions.
5.6 Operating (D)

Set pressure.

Check charging condition.
Wait until the pump switches off.

Spray
The integrated pressure sensor regulates the pump speed and switches the pump on and off.
5.7 Nozzle capacity (E)

Spraying - 0 turn

Jet - 2 turns
5.8 Shut-down (F)
Dispose in a correct way of residue and according to the manufacturer’s indications.

Empty, rinse with clean water.

Set max. Pressure, spray until no more liquid comes out.
Nozzle setting: Jet.

Fill with clear water, switch on the device (max. pressure), spray until no more liquid comes
out.

Clean nozzle.
Do not use hard objects.
Do not blow through with your mouth: risk of poisoning!

Always store tank empty, open and protected from frost.
If not in use for a longer period of time: store the fully charged battery separately from the appli-
ance.