Roth Sub Zero, Руководство пользователя

Страница: 9 / 16

USer ManUal
engliSH
rothaudio.co.uk | 9
Setup Instructions
1. Unpack all the parts noted on page 6.
2.
If your TV has a headphone output, plug the supplied 3.5 mm mini stereo cable into the headphone jack output of
your TV and the other end goes to the Input 3 jack on the back of your Sub Zero (shown below). This method will
disable your TV’s sound system and allow direct control of the Sub Zero audio with your TV’s remote control.
3. If your TV does not have a headphone output and you are using a set top box, plug one end of the included RCA
cable into the audio outputs of your set top box and the other end into Input 2 on the back of your Sub Zero. The
Sub Zero remote control and the control buttons on the front panel of the Sub Zero will always function no matter
what the audio input source is.
[Note] Some TV’s do not have a headphone output but do have Audio outputs with RCA jacks. You can connect them to Input 2 by using the RCA cable. This will
also work fine except that the Sub Zero volume must now be adjusted using the Sub Zero remote.
4. Input 2 can be attached to Blu-ray, DVD or CD players or to personal music players. Input 1 is an Optical Input.
If your TV does not have a headphone output, use this input to connect with the set-top-box by using an Optical
Input cable (not included).
5. Install the table stands and plug the Sub Zero power cord into the wall.
3.5 mm Stereo Cable
Input 1 Input 2
LR
Roth Bar 1 SubZero Manual NoStrap.indd 9 2/5/12 12:08:29