Roth Sub Zero, Руководство пользователя

Страница: 5 / 16

USer ManUal
engliSH
rothaudio.co.uk | 5
Caution
Never remove the back covers of the audio system as this can expose
you to very high voltages and other hazards. lf the system does not
operate properly, unplug the audio system and call your authorized
dealer or service center. Adjust only those controls that are covered in the
instructions.
Warning
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture
• The system should not be exposed to dripping or splashing and objects filled with liquids, such
as vases, should not be placed on the system.
• This apparatus shall be connected to a mains socket outlet with a protective earthing connection.
electrical Information
This system is fitted with a BS1363/A 13 amp plug. If it is not suitable for your
supply sockets it must be removed and replaced with an appropriate plug.
If the plug becomes damaged and/or needs to be replaced please follow the
wiring instructions below. The plug removed must be disposed of immediately.
It must not be plugged into a supply socket as this will be an electrical hazard. If
the fuse needs to be replaced it must be of the same rating and ASTA approved
to BS1362. If the plug is changed, a fuse of the appropriate rating must be fitted
in the plug, adapter or at the distribution board. If the fuse in a moulded plug is
replaced, the fuse cover must be refitted before the appliance can be used.
Wiring Instructions
The supply cable will be either 2-core or 3-core. Follow the appropriate wiring
instructions given below. In both cases ensure that the outer sheath of the
cable is firmly held by the cable clamp.
Precautions
• Do not place the system on uneven
surfaces or near the edge of a
cabinet.
• Unplug immediately if any foreign
materials falls into the system, of if
the system falls down.
• Do not open the system’s cabinet.
• Avoid direct sunlight, dust, high
humidity and smoky locations.
• Remember to unplug the power
cord from the AC outlet before
cleaning. Do not use liquid
cleaners or aerosol cleaners to
clean the system.
• Do not place the system near
water , such as a bathtub, shower
rooms, kitchen sink, laundry tub or
swimming pool.
• Do not place the system in
confined spaces or inside a box
when the system is operating.
• Make sure to unplug the system
when not in use for a long period
of time (days).
notice for remote Control
• Avoid dropping the unit.
• Avoid liquids on it.
• Avoid aerosol cleaners.
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of a sufficient
magnitude to constitute a risk of electric shock to a person. The exclamation point within an equilateral triangle, is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
2- Core plug
Warning!
Do not connect either wire to the earth terminal.
This symbol indicates that this 2-core
appliance is Class II and does not require an
earth connection.
The wire coloured blue must be connected to the
terminal marked with the letter N or coloured black.
The wire coloured brown must be connected to the
terminal marked with the letter L or coloured red
Blue
(Neutral)
Fuse
Brown
(Live)
Warning!
This appliance must be earthed.
3- Core plug
The wire coloured green and yellow must be
connected to the terminal marked with the letter
E, or by the earth symbol
or coloured green or
green and yellow.
The wire coloured blue must be connected to the
terminal marked with the letter N or coloured black.
The wire coloured brown must be connected to the
terminal marked with the letter L or coloured red.
Blue
(Neutral)
Fuse
Brown
(Live)
Green &
Yellow
(Earth)
Roth Bar 1 SubZero Manual NoStrap.indd 5 2/5/12 12:08:19