Roth HELIOSTAR Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 12

Roth HELIOSTAR Скачать руководство пользователя страница 8

8

Steps of installation

Installation instructions

3

1

2

1.

Fix attachment anchor universal with
3 screws 6 x 80 to roof lath. Attachment
anchor universal must be positioned in
the deep part of the tile.

Important:

The attachment anchor

universal may not impose pressure upon
the roof tiles.

2.

Pre-assembly profile rails on ground. The

screws for the connection of profile rails
and attachment anchor universal must be
inserted before joining the individual pro-
file segments. For this purpose measure
the position of the attachment anchor uni-
versal and mark on the profile rails. At this
spot insert 1 screw with U profile disc each.

3./4.

Afterwards insert connection of both

profile rails on the side.

5.

When connecting both profile rails push
the attachment clamps in the designated
grooves on the front side of the profile
rails (for horizontal installation consider
that the profile rails with closed long hole
are used as rails below – see detail A,
page 6).

5

4

«
...
6
7
8
9
10
...
»

Содержание HELIOSTAR













Отзывы:

Нет отзывов