Rotenso SETU, Руководство пользователя

Страница: 28 / 32

28
User manual
SETU remote control
EN
REMOTE CONTROL SUPPORT
7.7. LOCK function
Clean
5s
Turbo
+
5s
Press together Clean button and Turbo button at the
same time more than 5 seconds to activate Lock function.
All buttons will not response except pressing these two
buttons for two seconds again to disable locking.
7.8. SET function
or
SET SET OK
• Press the SET button to enter the function setting, then press SET button or TEMP or TEMP button
to select the desired function. The selected symbol will flash on the display area, press the OK button to
confirm.
• To cancel the selected function, just perform the same procedures as above.
• Press the SET button to scroll through operation functions as follows:
Breeze Away ( ) Sleep ( ) Follow Me ( ) AP mode ( )
[*]: If your remote controller has Fresh button or Sleep button, you can not use the SET button to select the Fresh
or Sleep feature.
Breeze Away ( ) (some units):
This feature avoids direct air flow blowing on the body and makes you feel indulging in silky coolness.
NOTE: This feature is available under cool, Fan and Dry mode only.
Sleep function ( ):
The SLEEP function is used to decrease energy use while you sleep (and don t need the same temperature
settings to stay comfortable). This function can only be activated via remote control.
For the detail, see “sleep operation” in user manual.
NOTE:
The SLEEP function is not available in FAN or DRY mode.
Follow me function ( ):
The FOLLOW ME function enables the remote control to measure the temperature at its current location and
send this signal to the air conditioner every 3 minutes interval. When using AUTO, COOL or HEAT modes,
measuring ambient temperature from the remote control(instead of from the indoor unit itself) will enable
the air conditioner to optimize the temperature around you and ensure maximum comfort.