Rotenso Dorai D16W, Руководство пользователя

Страница: 13 / 24

DORAI W - Dehumidifier
13 User manual
PART 1. FUNCTIONS
12. Fan pad
Control the fan speed. Press to select fan speed in three steps-low, med and high. The fan speed
indicator light illuminates under different fan speed settings. But when select high fan speed, both
the low and med fan speed lights illuminate.
13.
Timer pad
Press to initiate the Auto start and Auto stop feature, in conjuction with the and pads.
14.
Wireless pad (optional)
Press this pad for 3 seconds to initiate the Wireless connection mode. The LED DISPLAY shows
'AP' (at this time the unit shuts off all other functions) to indicate you can set Wireless connection.
If connection(router) is successful within 8 minutes, the unit will exit Wireless connection mode
automatically and the Wireless indicator illuminates and the unit enters the previous functions. If
connection is failure within 8 minutes, the unit exits the Wireless connection mode automatically.
15. Display
Shows the set % humidity level from 35% to 85% or auto start/stop time (0~24) while setting, then
shows the actual ( ± 5% accuracy) room % humidity level in a range of 30%RH(Relative Humidity) to
90%RH (Relative Humidity).
Error Codes and Protection Codes:
AS - Humidity sensor module error--Unplug the unit and plug it back in. If error repeats, call for
service.
ES - Temperature sensor error-- Unplug the unit and plug it back in. If error repeats, call for service.
P2 - Bucket is full or bucket is not in right position-- Empty the bucket and replace it in the right position.
2. OTHER FEATURES
1. Bucket Full Light
Glows when the bucket is ready to be emptied, or when the bucket is removed or not replaced in the proper
position.
2. Auto Shut Off
The dehumidifier shuts off when the bucket is full, or when the bucket is removed or not replaced in the proper
position. For some models, the fan motor will continue operating for 30 seconds.
3. Auto Defrost
When frost builds up on the evaporator coils, the compressor will cycle off and the fan will continue to run until
the frost disappears.
NOTE:
When Auto defrosting operation,the unit may make a voice of refrigerant flowing,it is normal.
4. Wait 3 minutes before resuming operation
After the unit has stopped, it can not be restart operation in the first 3 minutes. This is to protect the unit. Operation
will automatically start after 3 minutes.
5. Auto-Restart
If the unit breaks off unexpectedly due to the power cut, it will restart with the previous function setting
automatically when the power resumes.