Rotenso Dorai D10W, Руководство пользователя

Страница: 7 / 24

Dorai W - Dehumidifier
7
User manual
PART 1. SAFETY INFORMATION
TAKE NOTE THE FUSE SPECIFICATIONS
The units circuit board (PCB) is designed with a fuse to provide overcurrent protection. The specifications of the
fuse are printed on the circuit board, such as: T 3.15A/250V (or 350V), etc
NOTE:
All the pictures in the manual are for explanation purposes only. The actual shape of the unit you
purchased may be slightly different, but the operations and functions are the same.
NOTE ABOUT FLUORINATED GASSES
1. Fluorinated greenhouse gases are contained in hermetically sealed equipment. For specific information on
the type, the amount and the CO equivalent in tonnes of the fluorinated greenhouse gas(on some models),
please refer to the relevant label on the unit itself.
2. Installation, service, maintenance and repair of this unit must be performed by a certified technician.
3. Product uninstallation and recycling must be performed by a certified technician
CAUTION
• Do not use means to accelerate the defrosting process or to clean, other than those recommended by
the manufacturer.
• The appliance shall be stored in a room without continuously operating ignition sources (for example:
open flames, an operating gas appliance or an operating electric heater).
• Do not pierce or burn.
• Be aware that the refrigerants may not contain an odour.
• Appliance should be installed, operated and stored in a room with a floor area larger than 4m
2
.
• Compliance with national gas regulations shall be observed.
• Keep ventilation openings clear of obstruction.
• The appliance shall be stored so as to prevent mechanical damage from occurring.
• A warning that the appliance shall be stored in a well-ventilated area where the room size corresponds
to the room area as specified for operation.
• Any person who is involved with working on or breaking into a refrigerant circuit should hold a current
valid certificate from an industry-accredited assessment authority, which authorises their competence
to handle refrigerants safely in accordance with an industry recognised assessment specification.
• Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance and
repair requiring the assistance of other skilled personnel shall be carried out under the supervision of
the person competent in the use of flammable refrigerants.
CAUTION
Risk of fire/flammable materials
(Required for R32/R290 units only)
IMPORTANT NOTE
Read this manual carefully before installing or
operating your new air conditioning unit. Make
sure to save this manual for future reference.