Gebrauchsanweisung ○
Mode d’emploi
○
Istruzioni per l’uso
○
Instruction for use
26
ASSEMBLING AND USING THE VACUUM CLEANER
o
Ensure that the vacuum cleaner is switched off and disconnected from the mains sup-
ply before assembling.
o
Insert the hose connector into the socket on the main body of the cleaner and turn it
clockwise until it clicks into position (Fig. 1).
o
Fit the the telescopic tube into the handle until it clicks into position (Fig. 2).
o
Insert the other end of the telescopic tube into the nozzle required: For example, the
universal nozzle (A) for carpet or floor.
o
Remove the battery cover (E) and insert two AAA batteries.
o
Unwind the mains cable and plug it into a socket. Press the On/Off foot switch
(Fig. 3).
o
Press the power button on the remote control of the handle (F).
o
The unit will start at the MAX level 4, the level is shown on the LED display.
o
The level can be changed by pressing “+” / “
-
“ on the remote control of the handle
(F) or the main body.
o
Switch off the unit by pressing the power button on the remote control of the handle
(F) or the On/Off foot switch (I).
o
Unplug the mains cable and rewind it by pressing the foot switch for automatic cord
rewind (Fig. 4).
1
2
3
4
REPLACING THE DUST BAG
o
Always operate the device with a dust bag installed in the dust compartment.
o
Change the dust bag when the indicator turns red (Fig. 5)
or if the vacuum cleaner is
no longer effective
.
o
Open the dust compartment lid (Fig. 6 & 7).
o
Take out the bag holder, then remove the full dust bag (Fig. 8) and replace it.
