9
English
sequence, showing the next memorized track. Continue pressing the
REVIEW button to see the complete memorized track list.
If you do not press the REVIEW button while the track number is displayed,
the review process is terminated and the unit resumes whatever mode it
was in before you started to review.
Note that you may remove a selection from the play list during the review
procedure using the CLEAR button, as described below.
CLEAR Button
H
Remote Only
This button allows you to remove a track selection from the memorized
program play list during the review procedure described above. Follow
the review procedure until the desired track number is displayed. Then,
instead of pressing the REVIEW button to continue, remove the displayed
track by pressing the CLEAR button while the number is still showing. You
may then continue the review procedure.
RANDOM Button
D
Remote Only
This instructs the CD player to play tracks from the entire disc in random
order. Once all of the selections have been played once, the disc will
stop playing, unless the REPEAT Button (see below) has been engaged, in
which case the random play will continue until the STOP button is pressed.
When the RANDOM button is engaged, an icon will be displayed.
REPEAT Button
C
Remote Only
This button allows you to repeat the current track or the entire disc
continuously until the feature is cancelled by disengaging the REPEAT
button or pressing STOP. The REPEAT button steps sequentially through the
available options. Press the button once and the RCD-12 will repeat just
the current track, displaying the icon in the Display. Press the button a
second time and the RCD-12 will repeat the entire disc, displaying
in
the Display. Press the button a third time to cancel the REPEAT function.
As noted above, REPEAT can be used in conjunction with the RANDOM
play feature.
NOTE:
The REPEAT function is automatically cancelled when the disc
is ejected.
SCAN Button
E
Remote Only
This feature automatically plays the first ten seconds of each track on
the disc (or the memorized program). To activate the feature, press the
SCAN button. The icon appears in the Display. To stop scanning and
resume normal operation at the current track, press the SCAN button
again or press the PLAY button.
TIME Button
G
Remote Only
Normally, the RCD-12 displays the elapsed time of the currently playing
track. The TIME button allows you to step through two alternative time
displays. Pressing the button once displays the time remaining in the
current track, which counts down as the track continues playing. Pressing
reverse at 4X, then 8X, 16X, and 32X normal speed. One more press of
these buttons, or by pressing PLAY button returns the player to normal speed.
While the buttons are pressed, you will hear high-speed audio.
Additional Features
These convenience features add extra functionality to the RCD-12, including
the ability to memorize a group of tracks to be played, to repeat a disc,
program, or track over and over, to play the tracks on a disc in random
order, to automatically play the first 10 seconds of each track, and to
select from several available time displays.
PROGRAM Button
J
Remote Only
This button, labeled PROG, allows you to memorize as many as 20 tracks
on the current disc for playback in a specific order.For example, you
could instruct the RCD-12 to play track 5,followed by track 3, followed
by track 8.
Note:
Programmed play lists cannot be set up with MP3 and WMA
discs.
To begin a program:
Insert a disc into the slot loader. The RCD-12 will read the contents
1.
of the disc.
Press the PROG button on the remote control.The PROGRAM indicator
2.
will light up in the Display, along with “P-00” indicating that the unit
is waiting for the first track to be memorized.
Enter the first track number using the DIRECT ACCESS buttons.
3.
Your selection will be memorized automatically and the Display
indicator will change to “P-01”, indicating that one track has been
memorized. Continue entering the rest of your selections using the
DIRECT ACCESS buttons. Note that there is no need to press the
PROG button as each selection is memorized as it is entered.
Once you have memorized a play list, the RCD-12 remains in PROGRAM
mode until you eject the disc or press the STOP button twice in succession.
If you press the PLAY button, the memorized program will play instead of
the entire disc, starting with the first selection in the memorized list.
When a PROGRAM has been memorized, most functions that would
normally affect the entire disc operate on just the memorized program. For
example, the TRACK buttons advance to the next track in the memorized
program, not the next track on the disc. Likewise, the REPEAT button (see
below) continuously plays the memorized program, not the entire disc.
Note:
The Random Play feature can not be used when using the
Programmed Play feature.
REVIEW Button
I
Remote Only
This button is used to review the memorized tracks in PROGRAM mode.
Press the button and the first memorized track number will appear in
order in the Display, for approximately five seconds. Pressing the REV
button again while the track number is displayed will continue the review
