Gebrauchsanweisung ○
Mode d’emploi
○
Istruzioni per l’uso
○
Instructions for use
63
•
OPERATING INSTRUCTIONS
Mode selection
COOL mode
o
Press MODE until the COOL indicator lights on the panel.
o
Press UP/DOWN to set the appropriate temperature within a range between 18°C
and 30°C (64 to 86
℉
). When UP or DOWN is pressed once, the temperature will
increase or decrease by 1°C or 1
℉
.
o
Press SPEED to select the appropriate fan speed, either LOW or HIGH.
o
After selecting the COOL mode, press SLEEP on the remote control (or Timer button
+ Down button together on the control panel) to choose Sleep mode. Both upper and
lower fans are forcibly set at LOW speed. Under this mode, after the unit operates
for 2 hours, the setting temperature raises 1°C automatically. After operating for
another 2 hours, the setting temperature raises 1°C again. After that, the setting
temperature won’t change. Press SLEEP again to cancel this function.
Caution:
o
When WATER FULL indication is displayed, the air conditioner will stop operating until
the condensate water has been drained. After drainage, the air conditioner will start
automatically.
o
If you turn the air conditioner off and immediately restart it, or in the event of a
power failure during use, allow 3 minutes for the compressor to restart cooling. There
is an electronic device in the unit that keeps the compressor turned off for three
minutes for safety.
DEHUMIDIFY mode
o
Press MODE until the DEHUMIDIFY indicator lights on the panel.
o
Temperature and speed are not adjustable when this mode is selected.
Important:
for best efficiency in dehumidifying mode, make sure that windows and doors are
kept closed.
FAN mode
o
Press MODE until the indicator lights on the panel.
o
Press SPEED to select appropriate speed. LOW and HIGH speeds can be circularly
selected (high > low > high).
o
Temperature is not adjustable when this mode is selected.
o
The sleep function is not available for the fan mode.
