
Gebrauchsanweisung ○
Mode d’emploi
○
Istruzioni per l’uso
○
Instruction for use
111
•
INSTALLATION
Selection of installation equipment
o
Cut out the work surface according to the sizes shown in the drawing.
o
For the purpose of installation and use, a minimum of 5 cm shall be maintained
around the hole.
o
Be sure the thickness of the work surface is at least 30 mm. Please select heat
-re-
sistant and insulated work surface material (wood and similar fibrous or hygroscopic
material shall not be used as a work surface material unless impregnated) to avoid
electric shock and deformation caused by the heat radiation from the hotplate as
shown below:
Note:
o
The safety distance between the sides of the hob and the inner surfaces of the work-
top should be at least 3 mm.
L (mm) W (mm) H (mm) D (mm) A (mm) B (mm) X (mm) F (mm)
590
520
62
58
560
+4
+1
490
+4
+1
50 min.
3 min.
o
Always make sure that the induction
cooker hob is well ventilated and the air inlet
and outlet are not blocked. Ensure the induction
cooker hob is in a good working
condition as shown below.