Gebrauchsanweisung ○
Mode d’emploi
○
Istruzioni per l’uso
○
Instruction for use
108
The induction hob makes a
low humming noise when
used on a high heat setting.
This is caused by the tech-
nology
of induction cooking.
This is normal, but the noise
should quieten down or
dis-
appear completely when
you decrease the heat set-
ting.
Fan noise coming from the
induction hob.
A cooling fan built into your
induction hob has come on
to
prevent the electronics
from
overheating. It may
continue to
run even after
you’ve turned the
induction
hob off.
This is normal and needs no
action. Do not switch the
power
to the induction hob
off at
the wall while the fan
is running.
Pans do not become hot
and “u” appears in the dis-
play.
The induction hob cannot
detect the pan because it is
not
suitable for induction
cooking.
The induction hob cannot
detect the pan because it is
too
small for the cooking
zone or
not properly cen-
tred on it.
Use cookware suitable for
induction cooking. See sec-
tion
‘Choosing the right
cookware’.
Centre the pan and make
sure
that its base matches
the size of
the cooking zone.
•
FAILURE CODES AND DIAGNOSTIC
o
The induction hob is equipped with a self diagnostic function. With this test the tech-
nician is able to check the function of several components without disassembling or
dismounting the hob from the working surface.
Failure codes and solution
Failure
code
Problem
Solution
No Auto-Recovery
E1
Glass
plate temperature sensor failure
open circuit
.
Check the connection or replace the
glass
plate temperature sensor.
E2
Glass
plate temperature sensor failure
short circuit
.
Eb
Glass
plate temperature sensor failure
E3
High temperature of glass
plate sen-
sor
.
Wait for the temperature of glass
plate
return to normal.
Touch “ON/OFF” button to restart
unit.