Rotax OM-912, Руководство оператора

Страница: 50 / 64

Effectivity: 912 Serie BRP-Rotax page 10 - 20
OM Edition 1 / Rev. 0 Jan. 01/2007
d03934
.fm
10.4) Abnormal operation
▲
WARNING: At unusual engine behaviour conduct checks as
per Chapter 10.4.1) through 10.4.13) below, and as
per Maintenance Manual, Chapter 05) before the
next flight.
◆
NOTE: Further checks - see Maintenance Manual.
10.4.1) Engine stop - Start during flight
Starting procedure same as on ground, however, on a warm engine
without choke.
10.4.2) Exceeding of max. admissible engine speed
Reduce engine speed. Any exceeding of the max. admissible engi-
ne speed has to be entered by the pilot into the logbook, stating du-
ration and extent of overspeed.
10.4.3) Exceeding of max. admissible cyl. head temperature
▲
WARNING: Reduce engine power setting to the minimum
necessary and carry out precautionary landing.
Any exceeding of the max. admissible cylinder head temperature
has to be entered by the pilot into the logbook, stating duration and
extent of over-temperature condition.
10.4.4) Exceeding of max. admissible oil temperature
▲
WARNING: Reduce engine power setting to the minimum
necessary and carry out precautionary landing.
Any exceeding of the max. oil temperature must be entered by the
pilot in the logbook, stating duration and extent of over-temperature
condition.
10.4.5) Oil pressure below minimum - during flight
▲
WARNING: Reduce engine power setting to the minimum
necessary and carry out precautionary landing.
Check oil system.
10.4.6) Oil pressure below minimum - on ground
Immediately stop the engine and check for reason. Check oil sys-
tem.
- Check oil quantity in oil tank.
- Check oil quality (see section 10.2.3).