Rotax 125 JUNIOR MAX evo, Руководство по установке

Страница: 48 / 54

BRP-Rotax
INSTALLATION INSTRUCTION
CHECK OIL LEVEL IN GEAR BOX
The gear box is already filled with the appropriate
amount of oil 100 CC (0.026 gal.) by the engine man-
ufacturer. However, before the engine is installed in
the frame, the oil level must be verified or
replenished.
Step
Procedure
1 Place engine on a horizontal surface
and/or assembling trestle.
NOTE
To measure the oil level exactly, drain the gear
oil and determine it using a measuring cup.
Step Procedure
2 Loosen Allen screw (pos. 1) with gas-
ket ring (pos. 2) and absorb the leaking
oil in a measuring cup. If necessary,
remove the air vent screw (pos. 3) to
ensure a better oil drain.
3 Determine the gear oil using the meas-
uring cup.
NOTE
Oil capacity at new filling is 100 cc (0.026 gal).
NOTE
Specification of gear oil: engine oil SAE 15W-
40.
Step
Procedure
4 Tighten the Allen screw (pos. 1) with
new gasket ring (pos. 2) to 10 Nm.
5 Replenish new gear oil in the air vent
hole.
6 Hand-tighten the air vent screw (pos.
3).
Figure 8.1
1 Allen screw
2 Gasket ring
3 Air vent screw
7
Page 2
Edition: March 01 2021
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo