Rotary GLP99SM, Руководство по эксплуатации

Страница: 16 / 27

16
Lift does not operated Failure in the electric system Check the connections and electric
components for proper conditions.
Lowering operation cannot be performed Damaged lowering solenoid valve Check the failure of the electrovalve
Lowering is too slow Flow regulator valve for lowering control
does not work properly Contact service dept.
Motor rotates, but lifting operation cannot
performed. Lowering solenoid valve locked in opening
position.
No oil in the tank
Motor rotates the wrong way Contact service dept.
Refill with oil to the specified level
Check motor for proper direction of rotation.
Exchange the phases if necessary
Motor rotates, but lifting speed is extremly
slow. Lowering solenoid valve locked in opening
position
Worn pump Contact service dept.
Replace the pump
Normal capacity cannot be lifted
Max pressure valve malfunction
Suction filter malfunction
Worn pump Contact service dept.
Clean the suction filter or contact service
dept.
Replace the pump
Platform out of synchronization Leackage in the hydraulic system
Levelling electrovalve malfunction Repair the leackage in the hydraulic system
and
perform all operation of
synchronization. Contact service dept. in
case of recurring anomaly.
Contact service dept.
Hand lowering
To lower the platforms, raise the lift with the hand pump about 2 cm., lift the mechanical safety pawls using a wooden shim of
about 3 cm and place it along the rack. (see diagram.) Unscrew with an hexagonal key (see diagram.) With a “5” hexagonal key
unscrew very slowly the hand lowering valve taking care of the lift lowering. when the lift is fully lowered screw the hand
lowering valve. Once the trouble has been repaired, raise the lift and remove the wooden shims.
CHAPTER 8-ACCESSORIES
Available optionals are:
•
Set of extension hoses