3
Rotadent ProCare — Instructions for Use
Preparing for Use
Charging Your Rotadent ProCare
The Rotadent ProCare is powered by a rechargeable NiMH battery. When fully charged, the
Rotadent ProCare may last up to two weeks (when used for two minutes, twice a day),
depending on brushing conditions.
Initial Charging
• Plug the power cord of the charging base into a working outlet.
• Place the Rotadent ProCare into the charging base. The charging indicators will blink.
Important: In order to achieve a full charge, your Rotadent ProCare must be charged for
24 hours before initial use.
Recharging
When the power level of your Rotadent ProCare noticeably decreases, it is time to recharge your
power handle. Follow the steps listed above and recharge the power handle.
Once the battery has reached a full charge, the LED indicators will stop blinking (as described in the
LED Indicators
section, on the next page). At that point, there is no risk of overcharging the battery
by leaving the handle on the charging base. For everyday use, you can safely leave the handle on
the charging base with the charging base plugged into the wall outlet, without affecting the useful
life of the battery.
Important: The handle is sealed for your safety and the battery is not accessible.
Assembling Your Rotadent ProCare
Color Ring Attachment
• Orient the color ring so that the taper matches the taper of the neck.
• The color ring will be oriented on the neck so that the internal detail matches the external detail
on the lower portion of the neck.
• Attach the color ring by hooking one edge on the bottom of the brush head and stretching it
into place.
• The color ring can alternately be attached by putting the color ring over the brush head and
sliding it down the neck into position.
• The color ring can be twisted gently around the neck until the internal detail of the color ring
matches the detail on the neck.
Brush Head Attachment
• Push the neck onto the handle, aligning the brush head with the on/off switch.
• Push the neck until it snaps into position and fully meets the handle.
