www.roswellmarine.com
3
PACKAGE CONTENTS
TOOLS & SUPPLIES NEEDED
3/32” Allen Key
5/16” Allen Key
3/16” Ball End
Allen Key
(x2)
R1 8” Tower
Speakers
(x2)
Wiring
Harness
x12
x2
x4
Heat Gun
Torque
Wrench
Utility
Knife
THREADLOCKER
RED
THREADLOCKER
BLUE
Wire Strippers
& Crimps
(x2)
Safety
Lanyard
(x4)
2.50” Clamp
Insert
R1 8” Tower Speaker Installation Instr
u
ctions
x12
or x8
1)
Use wire strippers to expose 1/4” of wire on all wires.
2)
Connect the tower wires to the speaker wiring harness
according to the LED configuration you plan to use.
3)
Heat shrink the connectors.
4)
Carefully push the wires back into the tubing.
x2
C
Speaker Harness
Connectors
Tower Wires
Deutsch Connector
Measuring
Tape
Carefully cut the first piece of shrink wrap with a utility
knife to expose all of the wires and remove the plug.
Be very cautious not to cut through the wire’s
insulation.
shrink wrap
Locate the wire exit points on your tower and remove
the plugs to access the wires. Carefully pull the
wires out of the tower.
A
B
Speaker (+)
Speaker (-)
LED 12V (+)
Blue LED (-)
Green LED (-)
Red LED (-)
White
Yellow
Black
Green
Blue
Red
