Rossle BIBER 22 BRUSH, Руководство по эксплуатации

Страница: 12 / 16

T e c h n o l o g y f o r c l e a n p o n d s
Working with the BIBER 22 BRUSH
The BIBER 22 BRUSH is designed to clean surfaces under water. Particularly on even wall and floor sur-
faces, the rotating brush is automatically drawn to the surface, which improves the cleaning ability and
generally makes it easier for the user to work with less effort. It is not necessary to use strong pressure,
which could damage the driving gears. With the BIBER 22 BRUSH it is possible to attach a suction hose
with a diameter of 50 or 38 mm to the built-in suction connector. If using the suction possibility at the
same time, the dirt can be removed through the slits in the brush and the clarity of the water is main-
tained. A clouding of the water is for the most part avoided. Using the speed control unit, you have the
possibility to choose between three different speeds in each direction. The rotation speed you choose is
indicated by an LED light.
For the wall surfaces we recommend a faster, for the horizontal surfa-
ces a rather slower rotation speed. In order to avoid damaging sensitive
surfaces like foil, we recommend starting with the yellow Vacu-grip brush
attachment. As an option, you can, however use the harder Vacu-grip
brushes in red = medium hard or green/red = hard. In the case of hard or
encrusted dirt we recommend the Clearpad. The loaded power unit can be
easily transported using the strap provided, just clip the power unit into
the power unit holder. The BIBER 22 BRUSH can now be steered by the
telescopic rod and the cleaning of the surfaces in the pool or pond will be systematically carried out.
Changing the Vacu-grip brush
Attention! Before carrying out any maintenance work on the BIBER 22 BRUSH, please disconnect the
brush from the power supply.
You can change the brushes easily using the brush lifter (1). Place the brush lifter into the slot (2) which
is indicated with an arrow (3). Lift the brush up and out (4) and pull the brush away from the driving unit.
To mount the brush, just set the arrow onto a slot and then press down hard until it locks into place.
Special accessories
The dirt-save is an additional brush
ring which, when clicked onto the
beaver head, remains in place. This
significantly reduces dirt drifting off
during cleaning. The view through
the water onto the pond wall is re-
tained. The dirt is sucked off through
the slots in the Vacu-grip brush.
Speedcontrol
12