Operation Instructions
14
AY-V64B Installation and Programming Manual
•
The factory default Programming code is 1234.
•
If a Programming code is not entered within 30 seconds, the AY-
V64B returns to Transmit mode.
5.4
Exiting Programming Mode
To exit the Programming mode at any time:
1.
Press the
#
key.
You hear a beep.
The Program LED turns off and the
Transmit LED turns red.
This indicates that the AY-V64B has returned to Transmit mode.
Wrong entries may reset the reader back to Transmit mode.
While in Programming mode, if no key is pressed for 30 seconds,
the AY-V64B exits Programming mode and returns to Transmit
mode.
5.5
Selecting Keypad Transmission Format
The AY-V64B has eight different keypad transmission selectable
formats.
To select a keypad transmission format:
1.
Enter Programming mode.
Press "
1
" to enter Menu 1.
2.
The Transmit LED turns red.
Enter the appropriate option number
for the keypad transmission format that
you wish to select (see Section
Three beeps are emitted on success.
Transmit
Program
Red
Transmit
Program
Green
Transmit
Program
Red Green
