Operation Instructions
AY-V64B Installation and Programming Manual
15
The system returns to Transmit mode.
The Program LED turns off and the
Transmit LED turns red.
If an incorrect option number is entered, a long beep is sounded.
The reader returns to Transmit mode and the keypad transmission
format remains unchanged.
•
Only one keypad transmission format can be active at any one time
•
When using the keypad transmission format “1 to 8 keys BCD,
Clock & Data" (Option 8), an additional input is required to specify
the number of keys in the PIN code.
5.5.1
19B
Keypad Transmission Format Option Number
See Table 3 to determine the option number for the keypad
transmission format you wish to select.
Table 3: Keypad Transmission Format
Keypad Transmission Format
Option
Number
Single Key, Wiegand 6-Bit (Rosslare Format)
Single Key, Wiegand 6-Bit with Parity Bits
Single Key, Wiegand 8-Bit, Nibbles Complemented
4 Keys Facility code, Wiegand 26-Bit
1 to 5 Keys + Facility code, Wiegand 26-Bit
6 Keys BCD and Parity Bits, Wiegand 26-Bit
Single Key, 3x4 Matrix Keypad
1 to 8 Keys BCD, Clock & Data Single Key
1*
2
3
4
5
6
7
8
* Option 1 is the default factory setting.
More information on each of the different keypad transmission
formats is available below and on the following pages.
5.5.1.1
21B
Single Key, 6-Bit Wiegand (Rosslare Format)
Each key press immediately sends 4 bits with 2 parity bits added; even
parity for the first 3 bits and odd parity for the last 3 bits.
Transmit
Program
Red
