Bezel Screw
Installation
Mounting the AC-C31 Controller
1)
2)
3)
Before starting, select the location to mount the AC-C31
controller. This location should be at shoulder height and on the
same side as the door handle.
The AC-C31 is designed to be easily mounted to a US Gang Box.
Remove the Bezel Screw. (Use the diagram below to help you
locate the Bezel Screw)
Screw the controller onto a US Gang Box through the two
Mounting Holes provided. (See diagram on the next page to help
you locate the US Gang Box mounting holes)
Page 6
06/01
AC-C31
4)
5)
Pass the wires through the exit/entry holes and attach them to
the controllers terminal blocks as shown in the wiring diagrams.
(Wiring diagrams for common installations can be found on
pages 10 to 12).
Replace the controller’s bezel and replace the factory default
screw with the security screw that is provided in the Installation
Kit. A security screw tool is also provided in the Installation Kit.
A few of the typical wiring diagrams are shown on the next three
pages; for other wiring diagram examples refer to the support
section of the Rosslare Web Site.
http://www.rosslare.com.hk/support
Wiring the AC-C31 Controller
Page 7
08/01
AC-C31
Mounting Hole
Terminal Blocks
AC-C31
1
2
3
4
5
6
7
8
9
0
#
MODE
DOOR
3
4
Door LED
Mode LED
Bell Button
2 x 6 Matrix Keypad
1
2
3
4
5
6
7
8
9
0
#
MODE
DOOR
Mounting Hole
