Rosslare AC-225 PCBA, Инструкция по установке и эксплуатации

Страница: 4 / 45

Introduction
AC-225 Hardware Installation and User Guide Page 3
1. Introduction
AC-225, AC-225IP and AC-225U access control panels are
state-of-the-art networked access controllers, employing the
latest technology to meet the requirements of the market.
When used in combination with Rosslare's VeriTrax software
system, the AC-225 gives you full control over access to your
premises. The system can control both single and double door
entrances, supports up to 30,000 users and uses flash memory
to enable easy firmware upgrades.
For more information on the VeriTrax AS-225 system, refer to the
VeriTrax Access Control System User Guide.
The AC-225 consists of the following components:
• AC-225 controller board
• Panel enclosure
• PS-14 power supply
• Power Transformer (not included with the AC-225U)
The AC-225IP also includes on-board support for
communications across a TCP/IP network.
The AC-225U is for US installations. It has been approved by UL
for use as a stand-alone unit only.