Rosslare AC-115, Руководство пользователя программного обеспечения

Страница: 16 / 94

Set up the Connection to the PC
AC-115 Software Installation and User’s Guide Page 15
1 2 3 4 #
•
q
The “*” key is the bell button.
•
r
The “#” key is used for entering or exiting local
programming mode.
Now that you are more familiar with the AC-115 interface, you
are ready to start local programming.
The following is an example of setting an AC-115 Door Number.
1. Press the ”#” key for 2 seconds.
• Mode LED flashes orange.
• Door LED turns off.
2. Enter your 4-digit Programming Code
and press the “#” for confirmation.
If the Programming Code Is valid the
Mode LED stops flashing.
3. Press “61” to enter Menu 61.
• The Mode LED turns red.
4. Enter the 2-digit Door Number between
01 and 08. This is the new door number.
• The Mode LED turns orange.
5. Press the “#” key for 3 seconds to exit
programming mode.
• The Mode LED turns green.
You have now programmed the Door Number
of an AC-115 door controller. This must be done for each door.
You are now ready to start using the PC software. Once you
have learned to login to the software and get acquainted with
the main screen, you can proceed to test the connection with
the AC-115.
Mode Door
Orange
6 1
Mode Door
Red
? ?
Mode Door
Orange
#
Mode Door
Green