Rosslare AC-115, Руководство пользователя программного обеспечения

Страница: 15 / 94

Set up the Connection to the PC
AC-115 Software Installation and User’s Guide Page 14
Set up Door Numbers for Multi-Door AC-115 Network
It is very important to assign unique Door Numbers to each AC-
115 in the network.
The Door Number correctly identifies the hardware when they
communicate through the serial port. You need to remember
the Door Numbers you assign when you are setting up the
software.
Door Numbers can only be programmed from the 3x4 matrix
keypad of theAC-115 controller and not from the PC. This is
called “local programming”.
Local programming is covered in extensive detail in the AC-115
Hardware Installation and Users Guide.
First a quick introduction of the AC-115 local programming
interface.
Figure 11: AC-115 Keypad
There are two status LED’s on the AC-115.
•
n
This DOOR LED is used to assist navigation through the
local programming menu.
•
o
This MODE LED indicates the current mode of
operation of the AC-115. It also assists navigation through
the local programming menu.
•
p
This is the 3x4 matrix keypad. It has buttons from “0” to
“9” that are used when entering programming settings
and when entering Personal Identification Numbers (PIN).