NEED ASSISTANCE?
Please contact our customer service support at (847) 763-1215
and we’ll be happy to assist with any assembly questions,
comments, or concerns.
ROSSETO
®
3714 Jarvis Avenue, Skokie, IL 60076
Visit our website at www.rosseto.com
EZ-SERV® Wall Mount Dispenser
CLEANING INSTRUCTIONS:
1. To maintain the quality of your EZ-SERV
®
container, wash all parts in warm, soapy water. Use a non-abrasive sponge.
2. DO NOT put any part of the unit through any dishwasher, dryer machines, or submerge in water.
3. When disassembling the container, handle all parts gently. Please refrain from using too much force.
4. Reassemble the unit only after all parts are completely dry.
HOW TO DISASSEMBLE:
1.Gently lift your container by a couple of inches, stopping before the steel handle hits the metal. Angle the top of the
container towards you until the back end of the container is cleared through the opening. After this, you may clear the
rest of the container through the opening. Handle your container with care by making sure the steel handle does not
hit the metal.
2. Set your container on a flat surface. Remove lid from top of container. Make sure there is no remaining product inside
that can spill over.
3. Gently pull the handle from the front of the container. Set aside.
4. Reach into container and remove portion wheel by gently pulling upwards or turning container upside down.
HOW TO ASSEMBLE:
1. Place portion wheel into container.
2. Adjust the portion wheel inside the container, so that its holes align with the container’s holes (both front and back).
3. Then insert the handle through the front by aligning the half-moon shaft with the paddle.
4. Fill container with desired dry product and place lid securely on the container.
6. Follow Steps 6 through 10 on Page 1.
CARING FOR YOUR CONTAINER
IS008 V
3
FEB 2022
The Rosseto interchangeable portion wheels deliver just the right amount of product every time. Test each
wheel with your dry foods to determine which works best for you!
BRACKET DIMENSIONS
