Ross W70 Series, Информация о продукте

Страница: 15 / 20

IMPORTANT NOTE:
Please read carefully and thoroughly all of the
CAUTIONS, WARNINGS
on the inside back cover.
C5.19 www.rosscontrols.com
Online Version
02/19/20

Both single and double interposed regulators are available for valves with C
V
ratings up to 4.2. A regulator is bolted to the valve’s
sub-base or manifold station, and the valve is then bolted to the regulator. This mounting method allows the valve to be removed and
replaced without disturbing the regulator.
Single pressure regulators provide the same regulated pressure at both outlet ports. Double pressure regulators allow the pressure at
each outlet port to be set independently.
A locking type knob is used to set the regulated pressure at any point in the range of:
5 to 100 psig (0.3 to 7 bar) for size 1 and 2 models;
5 to 125 psig (0.3 to 8.5 bar) for size = 4.2 models.
Maximum inlet pressure is 150 psig (10 bar).
Pressure gauge(s) included.
Interposed Pressure Regulators
Flush flexible manual overrides are standard on solenoid pilot controlled valves with C
V
ratings of 2.0 or larger. Both locking and non-
locking metal override buttons are also available for these models.
Each of the override buttons in the kits at the right is made of metal and is spring-returned. The locking type button, however, can be
kept in the actuated position by turning the slot in the top of the button with a screwdriver.
Manual Override Kits
Accessories
Double interposed regulators will reverse output
ports - the 12 solenoid will pressurize the 4 port,
the 14 solenoid will pressurize the 2 port - which
may cause unexpected, potentially dangerous
cylinder movement at valve pressurization.
WARNING:
for ANSI Valves
W70 & W74 Series
Extended Button
Locking Type Kit Number
Non-Locking 791K87
Flush Button
Locking Type Kit Number
Non-Locking 790K87
Locking 792K87
Extended Button
with Palm
Locking Type Kit Number
Non-Locking 984H87
ANSI
Size
Interposed Regulator – Model Number
Single
Double *
Solenoid Remote Air
1 840C91 841C91 713C91
2.5 626C91 627C91 714C91
4 632C91 633C91 715C91
* Double regulator only for W70 spool valves.
Port
Size Thread
Type
Model Number
Avg.
C
V
Dimensions inches (mm)
Weight
lb (kg)
NPT Threads G Threads
Width Length
1/4 Male 5500A2003 D5500A2003 2.1 0.9 (21) 2.2 (55) 0.1 (0.1)
3/8 Male
5500A3013 D5500A3013 2.7 0.9 (21) 2.2 (55) 0.1 (0.1)
5500A3003 D5500A3003 4.3 1.3 (32) 3.5 (88) 0.2 (0.1)
1/2 Male 5500A4003 D5500A4003 4.7 1.3 (32) 3.6 (91) 0.2 (0.1)
3/4 Male
5500A5013 D5500A5013 5.1 1.3 (32) 3.6 (92) 0.2 (0.1)
5500A5003 D5500A5003 11.5 2.0 (51) 5.3 (135) 0.6 (0.3)
1 Male 5500A6003 D5500A6003 14.6 2.0 (51) 5.4 (138) 0.6 (0.3)
1 1/4 Male 5500A7013 D5500A7013 16.4 2.0 (51) 5.5 (140) 0.6 (0.3)
Pressure Range:
0 to 290 psig (0 to 20 bar) maximum.
Flow Media:
Filtered air.
Silencers
C5
C