Ross VEA-8707A, Руководство пользователя

Страница: 29 / 40

VEA-8707A User Manual (Iss. 01) Menus • 4–3
DashBoard Menus for the VEA-8707A
This section briefly summarizes the menus, items, and parameters available from the DashBoard
Control System™ for the VEA-8707A. Parameters marked with an asterisk (*) are the factory
default values.
The DashBoard Control System™ enables you to monitor and control openGear frames and cards
from a computer. DashBoard communicates with other cards in the DFR-8300 series frame
through the Network Controller Card.
Status Tabs
Table 4.1 summarizes the Status tabs available in DashBoard for the VEA-8707A.
Table 4.1 Status Tab Items
Tab Title Item Parameters Description
Product
(Read-only)
Product VEA-8707A
Supplier Ross Video Ltd.
Board Rev ##
Board S/N ###### Indicates the card serial number
Software Rev ##.## Indicates the software version
Hardware
(Read-only)
HW Status
OK
Indicates any problems with the card
hardware components
FPGA load invalid
Incomp I/O Module
Current out of spec
Internal Error
Voltage (mV) # Supply Voltage
Current (mA) # Current consumption of card
Rear Module # Indicates the rear module in the slot
CPU Headroom # Processing power available
RAM Available #/## On-board processing memory available
Uptime (h) #
Displays the number of hours since the
last restart of the card
Configuration Bank # Storage count
Signal
(Read-only)
Signal Status
Green - Video Present Card is passing valid analog video
Green - AES/Other
Card is passing AES audio or other analog
signal
Green - No Input
No input present or the signal is below the
detection threshold. The Notify on Loss of
Input option is disabled.
Red - No Input
No input present or the signal is below
0.3Vp-p. The Notify on Loss of Input
option is enabled.