Ross VEA-8707A, Руководство пользователя

Страница: 17 / 40

VEA-8707A User Manual (Iss. 01) Installation • 2–5
Cabling for the VEA-8707A
This section provides information for connecting cables to the installed Rear Modules on the
DFR-8300 series frames. Connect the input and output cables according to the following sections.
DFR-8310 Series Frame Cabling Overview
In the DFR-8310 series frames, the VEA-8707A is used with the following Rear Modules:
• 8310AR-030 (R1-8707) Rear Module — Each card occupies one slot and provides eight
analog video outputs, and an analog video input. The input must be terminated on the
VEA-8707A using
JP8 . Refer to Figure 2.2 for cable connections.
• 8310AR-032 (R1L-8707) Rear Module — Each card occupies one slot and provides
eight analog video outputs, a single analog video input, and an input looping connection.
Refer to
Figure 2.3 for cable connections.
DFR-8321 Series Frame Cabling Overview
In the DFR-8321 series frames, the VEA-8707A is used with the following Rear Modules:
• 8320AR-030 (R2-8707) Full Rear Module — Each card occupies two slots and provides
eight analog video outputs, and an analog video input. The input must be terminated on
the card by setting
JP8 to TERM . Refer to Figure 2.2 for cable connections.
• 8320AR-032 (R2L-8707) Full Rear Module — Each card occupies two slots and
provides eight analog video outputs, a single analog video input, and an input looping
connection. Refer to
Figure 2.3 for cable connections.
• 8320AR-031 (R2S-8707) Split Rear Module — Each card occupies one slot and provides
one analog video input, and four analog video outputs. Refer to Figure 2.4 for cable
connections.
Figure 2.2 Cable Connections for the
R1-8707 and R2-8707 Rear Modules
Figure 2.3 Cable Connections for the
R1L-8707 and R2L-8707 Rear Modules