Printed in Canada.
3
Installing the MicroSD Card into the New Cooling Fan Module
The MicroSD card provides system storage and a default software build. The MicroSD card slot is located inside the
Cooling Fan Module and between the first fan and the fan PCB in the module. You must remove the MicroSD card
from the failed Cooling Fan Module and install it in the new Cooling Fan Module.
To eject the MicroSD card from the failed Cooling Fan Module
1.
Remove the Cooling Fan Module as outlined in the section “
To remove the Cooling Fan Module from the
Figure 5
Location of MicroSD Card Slot — Between the Fan and the Fan Board
1.
Locate the MicroSD card slot inside the failed Cooling Fan Module. Refer to
2.
Gently press in on the MicroSD card so that it pops out from the slot.
3.
Make a note of the orientation of the card in its slot. This will help with installing the MicroSD card into the
new Cooling Fan Module.
4.
Gently pull the MicroSD card out.
Notice
— You must use the MicroSD card from the failed Cooling Fan Module. Use of an alternate
MicroSD card will result in loss of vital system information. Swapping out the MicroSD card with a
different MicroSD card returns the router to its factory default settings.
Notice
— Perform this procedure only if instructed by Ross Video Technical Support. Customer
supplied MicroSD cards may prevent and/or corrupt normal operation.
A
DETAIL A
MicroSD Card
simss
d
sim
ssd