Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 266 / 332

8–24 • Memory Functions and More Synergy Series Operation Guide (v18)
Working with Storage Devices
This section provides instructions for storing and recalling Synergy registers to a storage device, such
as a floppy disk or USB key. The following topics are discussed:
• Notes on Using a USB Key
• Saving Registers
• Saving Individual Memory Registers
• Saving Individual Custom Control Macros
• Saving Individual Squeeze & Tease 3D Sequences
• Recalling Registers
• Recalling Individual Memory Registers
• Recalling Individual Custom Control Macros
• Recalling Individual S&T 3D Sequences
Each topic is explained in detail below.
Notes on Using a USB Key
This option replaces the floppy disk drive on the control panel, and supports industry standard USB
keys. Once the option is installed, you can store and recall complete switcher setups including
memory functions, switcher personalities, installation parameters, and more, to a USB key.
Consider the following notes when using a USB key:
• Write protect should be disabled on any USB key.
• You must wait 5 seconds after inserting the USB key into the USB port before you can
save or recall registers to it.
• All Synergy files must be stored in the root directory of the USB key.
• Only DOS or Windows™ partitions are supported in the root directory of the USB key.
• You can use a computer to transfer files between floppy disks and a USB key. Ensure
that the switcher files are set in the root directory of the USB key before attempting to
save and recall switcher setups.
• A delay can be expected when saving files to a USB key with limited memory space.
• You may receive a “ USB Upgrade Failed ” error message when the Synergy control
panel is powered on. Should you receive this error message, contact Ross Video
Technical Support for instructions on how to correct the error.
Refer to Chapter 10, “ Completing Setup ” in the Synergy Series Installation Guide for details on the
types of storage errors and methods to correct them.
Note
You cannot store to or recall from a storage device while a custom
control function is playing.
Important A decrease in performance will result from storing more than one set
of Synergy files on your USB key. One set of Synergy files should not
comprise more than half of the available memory on your USB key.