Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 113 / 332

Synergy Series Operation Guide (v18) Switcher Basics • 4–35
Fade to Black
The following topics are discussed in this section:
• Using Fade to Black
• Changing Fade to Black Rates
• Using the Fade to Black Menu
Using Fade to Black
The switcher’s basic “ Fade to Black ” function allows you to cut or fade (auto-transition) the entire
switcher output to black, including all downstream keys and all effects currently on air. The following
figures illustrate the
Fade to Black Group .
•
Synergy 2
— The following figure illustrates the Fade to Black Group for the
Synergy 2 panel:
• Synergy 3, 4 — The following figure illustrates the Fade to Black Group for the
Synergy 3 and Synergy 4 panels:
Note Performing a Fade to Black will not change the audio levels on a
Remote Audio Mixer. Instead, Fade to Black turns off the Master
Audio Control on the Remote Audio Mixer. On most mixers this
means that a light simply goes out.
1) Cut to Black Button 2) Fade to Black Button 3) Fade to Black Display
1) Cut to Black Button 2) Fade to Black Button 3) Fade to Black Display
FADE TO BLACK
CUT FADE
FRAMES
1 2
3
FADE TO BLACK
CUT FADE
FRAMES
1 2 3