Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 115 / 332

Synergy Series Operation Guide (v18) Switcher Basics • 4–37
Notes on Fade to Black Rates
Please note the following when changing the Fade to Black rates:
• If you want to clear the rate and cancel the procedure, press the
FADE RATE
button
during the entry process.
• If you want to enter a different rate before pressing
ENTER
, simply continue to type
until the desired value is displayed.
• If you enter a rate greater than two digits (for example, 150 frames), the fade is
displayed on the bottom line but without the colon (for example,
F150
).
Using the Fade to Black Menu
The Fade to Black Menu allows you to select the combination of MLEs that you want to fade to
black — when a Fade to Black transition is initiated. You can select any number of MLEs, each of
which will fade simultaneously.
The function is useful for dual aspect ratio productions, in which one MLE is routed to the NTSC
transmitter (in 4x3 format) and another MLE is routed to DTV transmitter (in 16x9 format). Both
MLEs must fade simultaneously.
Use the following procedure to select the MLEs that you want to fade to black:
1. Navigate to the Fade to Black Menu as follows:
• Press HOME B MORE B Setup B Installation B Output B Fade to Black .
Fade to Black Menu
2. Toggle the desired MLEs On or Off , as required.
This completes the procedure to select the MLEs that you want to fade to black.