SMA-8018 Serial Monitoring Amplifier
1-3
Features
•
Auto reclocking of serial digital input
•
Input equalization for up to 1000 ft (300 meters) of cable
•
Six or seven serial digital outputs
•
One or two NTSC or PAL analog monitoring outputs
•
Excellent chroma modulation accuracy
•
Cable equalization for monitor outputs
•
10 modules fit into a 2 RU frame
•
Input level detection
Installation
1)
Cables
Connect the input and output cables. The input is internally terminated in 75 ohms. The BNC
connectors on the rear of the frame are marked for distribution amplifiers having eight outputs.
However, in the case of the SMA-8018, there are six or seven outputs of serial digital and one or
two analog composite video outputs. It is not necessary to terminate unused outputs.
Refer to the following.
2)
Set Jumpers
Set the jumper plugs to determine the nature of the analog output signal.
SYSTEM (JP2)
PAL
For 625 line systems
NTSC
For 525 line systems
CHROMA (JP2)
ON
The normal position
OFF
Used to output luminance only for the best picture on
a monochrome monitor.
SDl
Out 2
SDl
Out 4
SDI
Out 6
Analog
Out 1
SDI IN
SDI
Out 1
SDI
Out 2
SDI
Out 3
SDI Out 7/
Analog Out 2
7
2
4
3
6
5
8
IN
2
1
Cable Connections
