Ross openGear GPI-100, Руководство пользователя, Страница: 18 / 42

2–4 • Installation GPI-100 User Manual (Iss. 06)
4.
Connect one or more of the GPIO outputs of the card to a GPIO controlled device. Your
GPIO source is now driving your GPIO controlled device through the VANC.
5.
You must set the time for the log’s time stamp to be accurate:
• Select the Time tab and set the time according to the instructions in the section
“ Setting the Logging Timestamp ” on page 4-5.
• Select a Time Source (Timecode is recommended if it is available in the VANC).
• Set the other parameters if required for the Time Source.
• Click
Accept
to apply your changes.
6.
Select the Log tab of the decode card. Each time your GPIO source sends a trigger it
appears in the log. This tab shows the last 20 entries of the log file maintained on the
GPI-100. The complete log can be downloaded to the PC by clicking the
Download
Logfile
Save
button.