Ross OpenGear DRA-8902 Series, Руководство пользователя

Страница: 33 / 44

DRA-8902 Series User Manual (Iss. 02) DashBoard Menus • 4–5
Setup Tab
Table 4.4 summarizes the Setup options available in DashBoard.
Table 4.4 Setup Menu Items
Menu Title Item Parameters Description
Input #
Input Status
(read-only)
125M (MADI) (Green)
A MADI signal detected at 125Mbps is
present
270M (SD) (Green) A valid 270Mbps input signal is present
1.5G (HD) (Green) A valid 1.485Gbps input signal is present
3G (Green) A valid 2.97Gbps input signal is present
6G (Green) A valid 5.94Gbps input signal is present
12G (Green) A valid 11.88G input signal is present
Signal Not Locked
(Green)
An input signal is present, but not locked.
The Invalid Signal alarm is disabled in the
Alarms tab.
Signal Not Locked
(Red)
An input signal is present, but not locked.
No signal (Green)
A valid input signal is not present, but the
Invalid Signal alarm is disabled in the
Alarms tab.
No signal (Red) A valid signal is not present
Reclocker Data Rate
a
Auto*
Card automatically detects the incoming
data rate
125M (MADI) Reclocker is set to 125Mbps
270M Reclocker is set to 270Mbps
1.5G Reclocker is set to 1.485Gbps
3G Reclocker is set to 2.97Gbps
6G Reclocker is set to 5.94Gbps
12G Reclocker is set to 11.88Gbps
Outputs -
Channel #
Channel # (read-only)
Outputs 1-2
Indicates the OUT BNCs included in the
channel
Outputs 3-4
Outputs 5-10
Outputs 10-16
Input Select
Input A
Specifies that the signal on the SDI
INPUT A BNC is the primary source for
this output channel
Input B
Specifies that the signal on the SDI
INPUT B BNC is the primary source for
this output channel