background image

2–6 • Installation

DRA-8902 Series User Manual (Iss. 02)

Software Upgrades

The DRA-8902 can be upgraded in the field via DashBoard. Note that DashBoard version 8.0 or 
higher is required.

To upgrade the software on a card

1.

Contact Ross Technical Support for the latest software version file.

2.

Display the 

Device View 

of the card by double-clicking its status indicator in the 

Basic 

Tree View

.

3.

From the 

Device View

, click 

Upload

 to display the 

Select file for upload

 dialog. 

4.

Navigate to the 

*.bin

 upload file you wish to upload.

5.

Click 

Open

.

6.

If you are upgrading a single card, click 

Finish

 to display the 

Uploading to Selected 

Devices

 dialog. Proceed to step 8.

7.

If you are upgrading multiple cards:

• Click 

Next > 

to display the 

Select Destination

 menu. This menu provides a list of 

the compatible cards based on the card selected in step 2.

• Specify the card(s) to upload the file to by selecting the check box(es) for the cards 

you wish to upload the file to.

• Verify that the card(s) you wish to upload the file to. The 

Error/Warning

 fields 

indicate any errors, such as incompatible software or card type mismatch.

• Click 

Finish

 to display the 

Uploading to Selected Devices

 dialog.

8.

Monitor the upgrade.

• The 

Uploading to Selected Devices

 dialog enables you to monitor the upgrade 

process.

• Click 

OK

 to complete the upgrade. 

• The card(s) are temporarily taken off-line during the re-boot process. The process is 

complete once the status indicators for the 

Card State

 and 

Connection

 fields return 

to their previous status.

Содержание OpenGear DRA-8902 Series













































Отзывы: