Ross OpenGear DEA-8805, Руководство пользователя

Страница: 25 / 38

DEA-8805 User Manual (Iss. 04) Configuration • 3–5
Configuring the DEA-8805
This section briefly outlines how to configure the DEA-8805 using the options available in
DashBoard.
Configuring the Equalizer for a Channel
You can choose to enable or bypass the equalizer on each channel. The equalizer enables the card
to compensate for noise and signal losses inherent in long coaxial cable runs. Refer to the chapter
“
Specifications ” on page 5-1 for information on the cable equalization specifications for your
card.
To enable the equalizer
1. From the Device View , select the Setup tab.
Setup Tab — Enabling the Equalizer
2. Select the Enable Equalizer box for the channel. The box displays a check-mark.
To bypass the equalizer
1. From the Device View , select the Setup tab.
2. Select the Enable Equalizer box for the channel to clear the box contents.
Note
— You must bypass the equalizer when using signals of less than 125Mbps (such as
SMPTE 310 signals). For signals 125Mbps and greater (such as SDI signals), you must enable
the equalizer.