DEA-8205 User Manual (Iss. 06)
User Controls • 3–3
Control and Monitoring Features
This section describes the DEA-8205 LEDs.
Figure 3.2
DEA-8205 Card-edge Controls
Status and Selection LEDs on the DEA-8205
The front-edge of the DEA-8205 has LED indicators for the power, video input status, and
communication activity. Basic LED displays and descriptions are provided in
Table 3.1
.
Table 3.1 LEDs on the DEA-8205
LED
Color
Display and Description
PWR
Green
When lit green, this LED indicates that the card is functioning
normal and that no anomalies have been detected. The following
conditions must be satisfied:
• a valid input signal is present
• a valid reference signal is present when a reference is required,
and that the reference standard matches the input standard.
Flashing Green
When flashing green, this LED indicates that the Bootload button
was pressed, and the card is receiving a new software load from
the frame.
Flashing Green
and Orange
When lit green with flashing orange, this LED indicates a signal
or configuration problem. Verify the signal status and settings.
Amber
When lit amber, this LED indicates the card is running internal
diagnostics while powering up.
Red
When lit red or flashing red, this LED indicates the card is not
operational. Re-seat card in frame, check the rear module type
and connections, or call Ross Video Technical Support.
Off
When off, this LED indicates there is no power to the card.
Channel A Rate Selection
PWR LED
OK/ERROR LED
SD LED
HD LED
Channel B Rate Selection
OK/ERROR LED
SD LED
HD LED
Bootload Button (SW1)
Channel A
Channel B
