Ross MUX-8258 Series, Руководство пользователя

Страница: 43 / 56

MUX-8258 Series User Guide (v9.0) Card-edge Menus • 43
Menu Descriptions
This section briefly summarizes the menu parameters available in the card-edge display.
0 — Home
This read-only menu displays the product name and the slot the card is installed in the frame.
1 — Factory Defaults
This function enables you to return all controls to their factory default values. Use the following procedure to reset
the card parameters to factory default values using the card-edge controls:
1. Rotate
SW2
to
1
. The Four Character Display displays “ Fact Def ”.
2. Toggle
SW3
down and hold for 3 seconds.
3. Release
SW3
.
2 — Reference Source
This menu enables you to select where the card will look for a reference. The choices are Frame Reference 1 ( Fr 1 ),
Frame Reference 2 ( Fr 2 ), and Video ( Vid ). Refer to the section “ Reference Compatibility ” on page 23 for a list of
supported formats.
3 — Loss of Input
Use this menu to select what type of video displays at the system’s outputs when the input video signal is lost or
invalid.
4 — Test Pattern
This menu enables you to specify the type of test pattern to output. Note that this setting is not retained on power
down.
B Ch1 Bkp Channel 1 Backup Source Mute
T4k 4kHz Tone
T2k 2kHz Tone
T1k 1kHz Tone
T.5k 500Hz Tone
A1A - A8B AES 1A to AES 8B (MUX-8258-A,
MUX-8258-B)
Alg1 - Alg4 Analog 1 to Analog 4 (MUX-8258-4C)
Alg1 - Alg8 Analog 1 to Analog 8 (MUX-8258-8C)
G1C1-G4C4 Group 1, Channel 1 to Group 4,
Channel 4
C Ch2 Bkp Channel 2 Backup Source Same as above
D Ch3 Bkp Channel 3 Backup Source Same as above
E Ch4 Bkp Channel 4 Backup Source Same as above
Table 2.1 Card-edge Menus and Items
Menu
Select
Card-Edge Menu
Label
Menu Name
Card-Edge
Item Label
Item Name