Ross CrossOver 12 Solo, Руководство по настройке, Страница: 17 / 24

CrossOver 12 Solo Configuration Guide, v3.1 October, 2010 Page 17 of 23
Note: Specifications are subject to change without notice.
Note: CrossOver 12 Solo switchers meet applicable world standards for safety, emissions, and immunity.
Video Outputs
Number of Outputs 6 SDI
Return Loss > 16dB @ 1.5GHz
Rise and Fall Time
800ps +/- 10% (SD)
240ps +/- 10% (HD)
Signal Level 800mV +/- 10%
DC Offset 0 volts
Overshoot < 8%
• All video outputs are 10-bit SMPTE-259M-C (SD Mode) or 10-bit SMPTE-292M serial
digital (HD Mode).
• EDH is inserted into all outputs and can be disabled. Aux Bus outputs do not have EDH
insertion but do pass previously inserted EDH. (SD Video Mode).
• Line CRCs are inserted into all outputs and can be disabled. Aux Bus outputs do not
have line CRCs inserted but do pass previously inserted line CRCs. (HD Video Mode).
Jitter
Video Mode
HD – Tri-Level Sync
Alignment (> 100KHz) < 0.2UI
Timing (<10Hz) < 1.0UI
HD – Composite Reference
Performance not guaranteed with
composite reference
SD – Tri-Level Sync
Alignment (> 1KHz) < 0.2UI
Timing (<10Hz) < 0.2UI
SD – Composite Reference
Alignment (> 1KHz) < 0.2UI
Timing (<10Hz) < 0.5UI
System Timing
• All video inputs zero time relative to reference input, auto timing will correct for inputs out
of time by up to +/- 0.25 line.
• System delay approximately 500 pixels.
System Reference
Reference Format Video Format
480i/59.94
480i/59.94, 480i 16:9/59.94, 1080i/59.94,
720p/59.94
576i/50 576i/50, 576i 16:9/50, 1080i/50, 720p/50
720p/50 720p/50
720p/59.94 720p/59.94
1080i/50 576i/50, 576i 16:9/50, 1080i/50, 720p/50
1080i/59.94
480i/59.94, 480i 16:9/59.94, 720p/59.94,
1080i/59.94
CrossOver 12 Solo