Ross CrossOver 12 Solo, Руководство по настройке, Страница: 10 / 24

Page 10 of 23 October, 2010 CrossOver 12 Solo Configuration Guide, v3.1
horizontally and vertically to create the look you want, or you can use one of the useful pre-built 2D effects to perform
2D background transitions.
¥
UltraChrome Advanced Chroma Keying
The Ross UltraChrome™ uses advanced video processing technology to provide exceptional blue spill reduction and
clean edges, even with difficult source material. Glass, smoke, translucent materials, and natural shadows are handled
superbly.
¥
FlexiClean Clean Feed Output
FlexiClean is typically used for bilingual and live-to-tape productions. It provides a second Program output that is derived
from a different location than the standard program output. A frequent application is the recording of shows for later
airing without call-in phone numbers inserted.
The clean feed output can come from before or between the keyers. The diagram below illustrates the possible clean feed
configurations.
Note : The FlexiClean output is only available on one of the three (3) Aux Bus outputs.
Clean Feed Modes — CrossOver 12 Solo
¥
USB Media Drive
This feature makes it possible to store and recall switcher memories, media stills, and animations to a USB media drive.
This allows operators and technical staff to back up their memories and easily transfer these settings to other CrossOver
12 Solo Live Production Switchers.
¥
100 Event Switcher Memory
CrossOver 12 Solo comes standard with storage for 100 complete switcher snapshots. All of these memories can be
stored to a USB media drive, providing custom tailored memories for every operator and every show.
¥
Clear and Intuitive Displays and Buttons
CrossOver 12 Solo always lets you know what’s going on. A unique glow color can be set for each CrossOver control
panel. This color is applied to all the buttons on the control panel.
Red-lit on-air sources allow you to easily identify the sources, and Keys that are on-air.
¥
Memory AI Recall Mode
CrossOver takes the guessing out of memory recalls by ensuring that a memory recall will not affect what is currently on-
air. Memory AI uses the content of the memory to configure the Next Transition area and Preview bus for the
background and keyers so that the next transition takes the same sources on-air that were on-air in the memory.
¥
Multi-Viewer
All CrossOver 12 Solo Live Production Switchers come standard with a broadcast-quality integrated multi-viewer. The
multi-viewer allows you to view ten (10) video sources from a single output BNC. Any video source on the switcher,
including Program, Preview, and Media-Store channels, can be assigned to any box on the multi-viewer. All boxes on the
multi-viewer include mnemonic source names and red and green tallies.
KEY 1 KEY 2
PGM/
PST
PGM
FLEXI-
CLEAN
KEY 3