Ross ADA-8501, Руководство пользователя

Страница: 15 / 24

Cable Connections
This section provides instructions for connecting cables to the ADA-8501 when mounted in RossGear
8000 series Digital Products Frames. The cable connectors on the rear of the frame are marked for
distribution amplifiers having one input and eight outputs. The ADA-8501 cable connections match
the frame designations.
Connect the input and output cables according to the frame rear panel connections diagram in the
following figure. The input is internally terminated in 75 ohms. It is not necessary to terminate
unused outputs.
Figure 3. ADA-8501 BNC Designations for RossGear DFR-8110A (2RU frame)
ADA-8501 User Manual (Iss. 03) Installation and Setup
•
2-3