Configuration (Iss. 05) • 16
Format Display
This read-only menu indicates the reference system standard currently in
operation.
H Delay
Use this menu to adjust the output horizontal delay from 0 (zero) to one full line,
one pixel clock at a time. Note the following important points regarding
H Delay:
•
If you cross over the maximum H Delay for 1 line, the value returns to
0 (zero) and the V Delay value increments by 1.
•
Crossing the minimum delay returns the H Delay value to 1715 (525)
or 1727 (625) and decrements the V Delay value by 1.
H Reset
Use this menu to reset just the horizontal delay value to 0 (zero). This function is
particularly useful if your adjustment range is far off the mark, or if you simply
want to quickly return to zero.
V Delay
Use this menu to adjust the output vertical delay in one line steps.
V Reset
Use this menu to reset just the vertical delay value to 0 (zero).
Set Minimum Delay
Use this menu to reset both the H Delay and V Delay values to 0 (zero).
Reference Standard
Use this menu to select the input reference signal standard. You can set the
ADR-9039 to lock to 525 only, 625 only, or automatically detect either format
from the input signal.
Default
Use this menu to reset all settings to factory defaults. When the ADR-9039 is
restored to the default settings, both the
UP
and
DOWN
LEDs are unlit.
