Ross 4500DR-104-07 Скачать руководство пользователя страница 135

Страница: 135 / 161

SRG-4500 User Guide (v7.0)

GPS Option • 135

2. Cut a hole in the surface that will allow the cable to be thread through the surface. The cap will rest above the

surface. Refer to

Figure 16.2

for dimensions.

Figure 16.2 Antenna Cap — Dimensions

3. Position the cap above the hole and ensure the cable is easily fed through the hole of the surface.

Figure 16.3 Positioning the Antenna Cap

4. Thread the cable through the washer and nut.
5. Use the washer and nut to affix the antenna cap to the surface.

Figure 16.4 Securing the Antenna Cap

Connecting the SRG-4500 to the GPS Antenna

There are two methods of connecting the SRG-4500 with a GPS antenna: with an external line amplifier and

without an external line amplifier. This section summarizes both methods.



Note that the information presented in this section may differ from the requirements of your facility.

Connection without a Line Amplifier

An external Line Amplifier is not required in setups that do not use a long cable run between the GPS antenna and

the SRG-4500.

10.0

M14x1.25

Содержание 4500DR-104-07


































































































































































Результаты поиска

Содержание 4500DR-104-07

Отзывы:

Ross 4500DR-104-07, Руководство пользователя, Страница: 135 / 161

Результаты поиска

Содержание 4500DR-104-07

Отзывы: