PAGE 10
Rositek Technologies
www.rositek.com
© 2021 Rositek
All rights reserved
Email: [email protected]
TROUBLESHOOTING
How to Replace PID Module?
1. Unplug the power cord.
2. Lay down the machine backward with the pedal facing up.
2. Between the pedal and the base, you will find the locking mechanism of the PID module.
3. Use a small flathead screwdriver to depress in on the locking mechanism of the PID
module.
4. While depressing the locking mechanism, simply slide out the front of the box, the PID module
from the housing.
5. Install the replacement PID module received (remove it from the included housing first).
6. Once the PID module is installed and locked into place,reinstall the power cord.
7. Turn on the power switch.
Please see our website for more tips, innovations, industry news, and
promotional discounts.
MORE
INFORMATION
TURNING OFF
PRESS
1. Turn the machine off by flipping ON / OFF switch when done pressing.
2. Unplug and then disconnect the power cord from the press.
3. Wait until the press cools down completely to clean and store it.
CLEANING
PRESS PLATES
1. Make sure the press plates are completely cooled down before cleaning.
2. Apply a small amount of alcohol to a clean cloth and wipe down the plates
until clean. Use rubbing alcohol that contains at least 80% by volume of
isopropyl alcohol.
3. Wipe plates with a dry clean cloth.
4. Repeat these steps for cleaning all associated tools.
OPERATING INSTRUCTIONS (continued)
USER GUIDE AND TROUBLESHOOTING -- RMP2
