ROSIERES RVSD970PN, Инструкция по установке и эксплуатации

Страница: 11 / 28

10
IV. Bulb Replacement
1.Switch the unit off and unplug the appliance.
2.Remove the lamp cover by unscrewing the 2 screws.
3.Unscrew the incandescent bulb
4.Replace with the same type and rated bulb/lamp

E14 Incandescent Bulb: (220V E14 Max 40W).

Halogen lamp (max, 20W) & LED lamp (max,1.5W).
TROBULESHOOTING
Fault Cause Solution
Light on, but fan
does not work
The fan blade is jammed.
Switch of the unit and repair by
qualified service personnel only.
The motor is damaged.
Both light and
fan do not work
light bulb burn.
Replace the bulb with correct rating.
Power cord looses. Plug in to the power supply again.
Serious
Vibration of the
unit
The fan blade is
damaged. Switch of the unit and repair by
qualified service personnel only.
The fan motor is not fixed
tightly. Switch of the unit and repair by
qualified service personnel only.
The unit is not hung
properly on the bracket.
Take down the unit and check
whether the bracket is in proper
location.
Suction
performance
not good
Too long distance
between the unit and the
cooking plane
Readjust the distance to 65-75cm