500Mbps Powerline Gigabit Ethernet Adapter KIT
-
RPLC-500KIT
- User
’s Manual
-7-
1.5.1 LED
LED
Color
Behavior Description
(Power)
Green
On
System runs normally.
Green
Blink
System is resetting.
System is in the process of
password synchronization.
System is in Power Saving mode
-
Off
The PLC adapter is powered off.
(Ethernet)
Green
On
Ethernet connection has established.
Blink
Data is being transmitted.
-
Off
No Ethernet connection.
(Data)
Green/Orange/Red
On
The PLC adapter has connected to the
powerline network. The Data LED color
may vary according to the Data
Transmit Quality.
Green: Data Transmit Quality Excellent
Orange: Data Transmit Quality Average
Red: Data Transmit Quality Poor
-
Off
The PLC adapter does not connect to
the powerline network.
1.5.2 Powerline Adapter
’s Button and Connector
Reset:
Pressing and holding the Button for between 10 seconds and 15 seconds
makes the adapter restore the factory default settings.
Security:
Pressing and holding the button for less than 3 seconds makes the
adapter a member of the existing Powerline Network.
Ethernet Port (RJ45 Port)
: The Ethernet port connects to an Ethernet network
cable. The other end of the cable connects to your computer or other
Ethernet-enabled network device.
Connecting to the router/modem:
Insert One end of the RJ45 Cable
(Recommend using Cat 5E cable or above) to this port, and the other end to the
router or modem. Then plug into the electrical outlet.
