500Mbps Powerline Gigabit Ethernet Adapter KIT
-
RPLC-500KIT
- User
’s Manual
-20-
Please follow below to form a logical network using the Utility:
1.
Connect Device A to the network card of a PC.
2.
Open the Utility. The Main tab page displays information about Device A
after connection succeeds.
Search for Local device on your computer
3.
Click the Privacy tab page. Enter a name in the Private Network Name
field.
Setting the network name for your PLC
4.
Click
Set Local Device Only
. When the following page is displayed, the
setting succeeds. Now Device A has been removed from its logical
network.
Network name setting success
5.
Repeat the procedures above to configure Device B. Configure Device
